banner

High-Power Oscillating Saw S1040 12500CPM 180W

Short Description:

Bone resection is the step where a power saw either earns trust or loses it. The blade has to oscillate at a steady rate through cortical bone, the hand has to stay steady for the length of the cut, and heat has to be kept away from the bone that will carry the implant afterwards. The S1040 and S2040 high-power oscillating saw were specified around those three demands: 0 to 12500 cycles per minute, 180 W of output and a body that returns from 151 C sterilisation ready for the next room. This release covers the specification, the intraoperative behaviour, and the supply terms distributors ask about.


Acceptance: OEM/ODM, Trade, Wholesale, Regional Agency,

Payment: T/T, PayPal

Sichuan Chenanhui Tehnology Co., Ltd.is a supplier of orthopedic implants and orthopedic instruments and is engaged in selling them, owns its manufacturing factories in China, which sells and manufactures internal fixation implants Any inquiries we are happy to reply. Please choose Sichuan Chenanhui, and our services will definitely give you satisfaction.

Product Detail

Product Tags

I : Core Application & Clinical Advantages of the High-Power Oscillating Saw

The high-power oscillating saw runs a fully enclosed brushless high-output motor in stepless control, so blade speed rises with trigger travel instead of arriving in fixed steps. At the top of the range it delivers 12500 oscillations per minute with 180 W behind it, which is what keeps a blade cutting rather than skating when it meets dense cortical bone. Noise is held at or below 75 dB, host temperature rise stays within 50 C in continuous use, and the 1450 g pistol frame keeps the wrist out of the blade line during long resections.

Table 1. Technical specification of the S1040 / S2040 high-power oscillating saw

Item

Specification

Motor type Brushless, fully enclosed, high output
Working mode Stepless speed change
Saw frequency 0-12500 cycles per minute (tolerance -10%)
Output power >= 180 W
Temperature rise <= 50 C
Noise <= 75 dB
Sterilisation 151 C high temperature and pressure, battery excluded
Host weight 1450 g
Battery 12 V, 2600 mAh, two supplied
Charger AC 100-240 V, 50-60 Hz
Blade supply 4 blades in the standard kit
Warranty 18 months host, 6 months battery

The kit is assembled for immediate use: handpiece, two battery packs, four blades, pulse charger, isolation channel, manual, certificate, acceptance form, repair card and case. The head swings plus or minus 1.9 degrees on a Linvatec-type clamp, and blade changes are made at the sterile field with the supplied key, and the dual-battery arrangement with a universal charger covers a full resection list without a break for charging.

Core clinical merits

1.Steady oscillation under load. On this high-power oscillating saw, 12500 cycles per minute with 180 W of headroom keeps the blade cutting through cortical bone rather than chattering, which is where osteotomy lines start to drift.
2.Heat kept away from the bone. A host temperature rise limited to 50 C and continuous irrigation at the blade reduce the thermal exposure of bone that has to heal around a stem or a plate.
3.A quieter theatre. Noise at or below 75 dB lowers fatigue across repeated resections and makes spoken instruction easier during a long case.
4.Autoclavable handpiece. The body, blades and accessories take 151 C steam sterilisation; only the battery pack stays out of the autoclave.
5.Balanced for long cuts. At 1450 g with a pistol grip, the saw stays controllable through a femoral or tibial osteotomy where the blade is buried for several centimetres.

The high-power oscillating saw is one instrument in a family and should be selected as one. Fine bone work in the hand and foot runs better on the mini oscillating saw, while larger resections that need a longer stroke sit with the high-power reciprocating saw. The complete motor range is grouped under orthopedic power systems, and accessories, blades and chargers are quoted with the handpiece rather than as a separate line.

High-Level Oscillating Saw S5500
High-Level Oscillating Saw S6500

II : Reprocessing, Service Life & Procurement Guidance

The high-power oscillating saw runs a fully enclosed brushless high-output motor in stepless control, so blade speed rises with trigger travel instead of arriving in fixed steps. At the top of the range it delivers 12500 oscillations per minute with 180 W behind it, which is what keeps a blade cutting rather than skating when it meets dense cortical bone. Noise is held at or below 75 dB, host temperature rise stays within 50 C in continuous use, and the 1450 g pistol frame keeps the wrist out of the blade line during long resections.

Table 1. Technical specification of the S1040 / S2040 high-power oscillating saw

Item

Specification

Motor type Brushless, fully enclosed, high output
Working mode Stepless speed change
Saw frequency 0-12500 cycles per minute (tolerance -10%)
Output power >= 180 W
Temperature rise <= 50 C
Noise <= 75 dB
Sterilisation 151 C high temperature and pressure, battery excluded
Host weight 1450 g
Battery 12 V, 2600 mAh, two supplied
Charger AC 100-240 V, 50-60 Hz
Blade supply 4 blades in the standard kit
Warranty 18 months host, 6 months battery

The kit is assembled for immediate use: handpiece, two battery packs, four blades, pulse charger, isolation channel, manual, certificate, acceptance form, repair card and case. The head swings plus or minus 1.9 degrees on a Linvatec-type clamp, and blade changes are made at the sterile field with the supplied key, and the dual-battery arrangement with a universal charger covers a full resection list without a break for charging.

Core clinical merits

1.Steady oscillation under load. On this high-power oscillating saw, 12500 cycles per minute with 180 W of headroom keeps the blade cutting through cortical bone rather than chattering, which is where osteotomy lines start to drift.
2.Heat kept away from the bone. A host temperature rise limited to 50 C and continuous irrigation at the blade reduce the thermal exposure of bone that has to heal around a stem or a plate.
3.A quieter theatre. Noise at or below 75 dB lowers fatigue across repeated resections and makes spoken instruction easier during a long case.
4.Autoclavable handpiece. The body, blades and accessories take 151 C steam sterilisation; only the battery pack stays out of the autoclave.
5.Balanced for long cuts. At 1450 g with a pistol grip, the saw stays controllable through a femoral or tibial osteotomy where the blade is buried for several centimetres.

The high-power oscillating saw is one instrument in a family and should be selected as one. Fine bone work in the hand and foot runs better on the mini oscillating saw, while larger resections that need a longer stroke sit with the high-power reciprocating saw. The complete motor range is grouped under orthopedic power systems, and accessories, blades and chargers are quoted with the handpiece rather than as a separate line.

II : Intraoperative Use, Limitations & Service Cycle

1. Intraoperative protocol

  • Mark the osteotomy line before starting and keep irrigation running at the blade for the whole pass.
  • Start the high-power oscillating saw at reduced frequency to establish the kerf, then increase trigger travel once the blade is seated in the cut.
  • Let the blade do the cutting; levering the handpiece to speed the pass is the most common cause of blade fracture and of heat at the cut surface.
  • Inspect the blade after each case and replace it when the teeth dull, since a worn blade raises both temperature and operating time.

2. Limitations & common issues

  • Battery packs for the high-power oscillating saw are not autoclavable and must be kept out of the sterilisation cycle; a charged spare should sit outside the tray.
  • The high-power oscillating saw is intended for bone resection and debridement, not for cutting cement or metal, which damages the blade and loads the motor outside its design range.
  • Frequency and temperature figures assume correct feed pressure; forcing a dull blade through dense bone produces both noise and heat complaints.
  • Custom body colours and private labelling are production items with added lead time on a first order.

3. Maintenance & service cycle

  • Clean the blade hub and isolation channel after every case, and check the coupling for wear at the interval set by the hospital's reprocessing policy.
  • Host warranty runs 18 months and batteries 6 months, with blades, packs and chargers available as separate spares so a single component never idles the unit.
  • Test certificates, quality documents and packing lists are issued with each shipment for local registration and tender files.

Why Global Distributors & Hospitals Choose Our High-Power Oscillating Saw

✅ Factory-direct supply with volume pricing on the S1040 and S2040 high-power oscillating saw handpieces

✅ 12500 cycles per minute at 180 W on the high-power oscillating saw, with four blades, two batteries and a universal charger in every kit

✅ 151 C autoclavable body, 1450 g frame and noise held at or below 75 dB

✅ Batch inspection records and test reports prepared for tender and registration files

✅ Private colour, logo and packaging for distributors; quality system documents from an ISO 13485 and CE-MDR certified power tool supplier, on request.

Get Your Wholesale Quotation for the Maxillofacial Instrument Kit

Email us: cah@medtechcah.com

WhatsApp / Call: +86 15008449628

For a price list, a sample handpiece or a mixed power-tool carton, reach the power tool team through our contact page; units are quoted per handpiece, per kit or per complete set.

FAQ : The High-Power Oscillating Saw in Practice

Q1: What is the difference between S1040 and S2040?

A: Motor, output power and oscillation frequency are the same; the two differ in exterior design and in the colour options available for each. Comparison drawings are supplied on request.

Q2: Can the saw be autoclaved?

A: On the high-power oscillating saw, the body, blades and accessories withstand 151 C high-pressure steam. Battery packs must be removed before sterilisation.

Q3: How many blades come with a unit, and which types?

A: Four blades of the requested type ship with the standard kit; additional blade patterns, including fine and coarse teeth, are quoted separately.

Q4: What warranty applies?

A: 18 months on the host and 6 months on batteries, with spare packs, chargers and blades supplied separately and remote guidance included.

Q5: Is OEM branding available?

A: Yes. Body colour, logo printing and packaging are produced to order on bulk quantities, with lead time confirmed at quotation.

Q6: Which documents support registration and tenders?

A: Factory audit records, mechanical test reports, quality certificates, packing list and commercial invoice are issued with each shipment.

Video

  • High-Level Oscillating Saw S5500
  • High-Level Oscillating Saw S6500

  • Previous:
  • Next:

  • Write your message here and send it to us